Ergoline Canopy Lift Spring fits most Ergoline sunbeds

Inline Tube Fan 300mm please email for price

Inline Tube Fan 400mm

Black Goggles

Frame seal for perspexes for Hapro vertical tanners. Size length 4.15 metres - sufficient for 2 seals/1perspex.

Phillips S10 starter for use with spagetti type tanning tubes up to 25 watts and also display lamps.

Phillips S12 starter for use with tanning tubes up to 160 watts.

Sylvania PBS 160 starter for use with tanning tubes up to 160 watts.

Phillips S16 starter for use with tanning tubes up to 100 watts.

Cos 200 starter for use with tanning tubes up to 200 watts.

Phillips Cleo starter for use with tanning tubes up to 180 watts.

Electronic starter for use with tanning tubes up to 250 watts. Electronic starters last approximately 4 times longer than standard starters and help reduce...

Luna Black Goggles Eye protectors for use with all sunbeds.

2 Port push-in connectors for AWG 18-14 stranded wire

Luna coloured goggles. Eye protectors for use with all sunbeds.

 3 Port push-in connectors for AWG 18-14 stranded

4 Port push-in connectors for AWG 18-14 stranded wire

Weidmuller din rail mounted terminal block.

Weidmuller din rail mounted terminal block. Earth block.

Weidmuller din rail mounted terminal block.

Weidmuller din rail mounted terminal block. Earth block.

Coin runway for LCS 3100 token meter.Please confirm at checkout which token you are using for runner size

Back box for a t-max slave unit

70 deg C - Resetting temperature fuse used in sunbeds. (E.G. facial units and other parts of the sunbed where temperature sensing is used)

90 Deg C. Resetting temperature fuse used in sunbeds. (E.G. Facial units and other parts of the sunbed where temperature sensing is used)

Hapro Delta Leg Set

R.F.I Filter for hapro Delta/lumina

Fuse Carrier for Sunquest sunbeds

Display tube - 18 watts - blue. Length 2' Used in most types of sunbed.

Moeller 11 Dil M auxilliary contactor.

2.5 uf Capacitor. Used mainly on a fan.

4 uf Capacitor. Used mainly on a fan.

15 watt Ballast. Can be used in all sunbeds.

Display tube - 9 watts - blue - loop type. Used in most types of sunbed.

AEG Contactor

Display tube - 36 watts - blue. Length 4' Used in most types of sunbed.

Talema RS0015P1-2-012K..  240 volt in.  2 x 12 supplies out @ 0.63A. Used for powering T Max 3a Slave units.

6 uf Capacitor. Used mainly on a fan.

25 watt Ballasts. Can be used in all Sunbeds. 

Accentline 50 watt halogen - Red. Used in Ergoline Excellence series sunbeds.

Accentline 50 watt halogen - Blue. For Ergoline Excellence series sunbeds.

Accentline 50 watt halogen - Yellow. For use in Ergoline Excellence series sunbeds.

6.8 uf Capacitor. Used mainly for a fan.

36 watt Ballast. For use in all sunbeds.

8 uf Capacitor. Used mainly for a fan.

50 watt Ballasts. For use in all sunbeds.

80 watt Ballast. For use in all sunbeds.

Display tube - 58 watts - blue. Length 5' Used in most types of sunbed.

10 uf Capacitor. Used mainly for a fan.

Metal lampholder for HP facial bulbs in Ergoline 200/300 Classic and UWE sunbeds with 400 watt bulbs. Also for most UWE beds with 400 or 500 watt double...

100 watt Ballast. For use in all sunbeds.

Receiver bracket for Ergoline 26/28/38/200 Classic/300

White 4 core flex - 0.75 sq mm. Used for wiring

Ergoline 25mm Boxer Fan. For use in the facial unit of of 450/500/600 UTP & Classic series sunbeds.

Ergoline 50mm Boxer Fan. For use in the facial unit of later 450/500/600 Classic and Avantgarde series sunbeds.

Ceramic lampholder for HP 400 watt and 500 watt double ended facial bulbs in most makes of sunbed.

160 watt Ballast. For use in all sunbeds.

160 watt Ballast - Block type. For use in all sunbeds.

FCC68 Cable - 6 core. Used as a control cable

White 5 core flex - 0.75 sq mm. Used for wiring

Display tube - 30 watts - blue. Length 3' Used in most types of sunbed.

16 uf Capacitor.

Ceramic lampholder for HP facial bulbs in Ergoline 450/500/600/700 Classic range sunbeds.Also for 500/600 Evolution series, and 700/800/900 Excellence...

Control ribbon cable used on Hapro Lumina sunbeds

Boxer fan - 4". Fits most domestic and some smaller commercial sunbeds.

R.F.I filter. Used in Alisun sunbeds.

R.F.I filter. Used in Alisun sunbeds.

Boxer fan - 5". Fits most domestic and some smaller commercial sunbeds.

Filter set for Ergoline 200/300 series sunbeds. Filters fit in end of legs on the base.

200 watt Ballast - block type. For use in all sunbeds.

Flange ring - 250 mm.

Moeller TPE 11 D1L Time delay block.

Solenoide valve used on the breeze system on U.W.E sunbeds. Part no 241158.  Reconditioned unit in perfect working order.

Controls & Switchgear Contactors Ltd, 

Moeller TPE 11 D1L Time delay block.

Pair of filters for canopy of Ergoline 500/600 Evolution & 700/800 Excellence series sunbeds.

Alloy gauze filters for base of Ergoline 500/600 Evolution & 700/800 Excellence series sunbeds. Sunbeds have 4 per bed. Price is for 1 unit.

Control ribbon cable used on Hapro Lumina sunbeds

25 uf Capacitor.

Base pump for use aquaspray systems on U.W.E sunbeds. Part no 215905 - reconditioned unit in perfect working order.

Canopy Pump for use on aquaspray systems on U.W.E sunbeds. Part no 215905 - reconditioned unit in perfect working order.

Merlin Gerin Multi 9 - SO 15320 control.

400 watt high pressure facial bulb for use in all sunbeds. This type has 2 cable leads attached to it.

400 watt high pressure facial bulb for use in all sunbeds. This type has end contacts.

Flange ring - 300 mm.

45 degree bend - 250 mm.

225 watt Ballast - block type. For use in all sunbeds.

250 watt Ballast - block type. For use in all sunbeds.

180 watt Ballast - block type. For use in all sunbeds.

30 uf Capacitor.

40 uf Capacitor.

Eye Cones. Eye protectors for use with all sunbeds.

45 degree bend - 300 mm.

Power cable - 6 sq mm, 3 core, black rubber flexible.

'P' Seal for the front of the base trough on Ergoline 450/500/600/700 UTP and Classic sunbeds. Priced per complete length for one bed. (2.03mt)

Filter sets for canopy and base on 450/500/600 UTP & Classic series sunbeds.

500 watt high pressure facial bulb for use in all sunbeds. This type has 2 cable leads attached to it.

Paddle switch for all Ergoline sunbeds. Used for safety cut out of lamps if fan fails.

400 watt Ballast - block type. For use in all sunbeds.

45 uf Capacitor.

47 uf Capacitor.

50 uf Capacitor. Style 1.

Filters set for Ergoline Avantgarde series sunbeds.

Power cable -10sq mm, 3 core, black rubber flexible.

500 watt high pressure facial bulb for use in all sunbeds. This type has end contact on it.

50 uf Capacitor. Style 2.

60 UF Capacitor

90 degree bend - 250 mm.

Power cable - 5 core,  6 sq mm,  black rubber

75 uf Capacitor.

80 uf Capacitor.

83 uf Capacitor.

400 watt Facial Ignitor. Used to start high pressure facial bulbs on all sunbeds.

500 watt Facial Ignitor. Used to start high pressure facial bulbs on all sunbeds.

90 degree bend - 300 mm.

Wink Ease. Eye protectors for use with all sunbeds.

125 uf Capacitor.

500 watt Ballast. For use in all sunbeds.

RFI Funkinfilter

0.47 uf RFI filter for use in Alisun sunbeds.

Clear facial glass for 200/300 series sunbeds

Tee piece - 250 mm.

L1 Token. This token is for use with LCS 3100 series token meters. Bag of 50 tokens.

L4 token. This token is for use with LCS 3100 series token meters. The price is for a bag of 50 tokens.

Wyvern Token. This type of token is used in metal case type Wyvern token meters and can be found on many different types of sunbeds. The price is for a...

200 uf Capacitor.

0.47 uf RFI Funkenfilter - 2 x leads + 2 x spade connectors.

CD Drive Unit

Slotted aeroband - per 30 mt roll. Used to fasten flexible

Side Perspex for Zenith - Standard version. Size: 1964 x 210 x 2mm. - New Part

1000 watt Facial Ignitor. Used to start high pressure facial bulbs on all sunbeds.

150 uf Capacitor.

Frame seal for perspexes for Hapro vertical tanners. Size length 4.15 metres - sufficient for 2 seals/1perspex.

Base Tube End Cover for a 200/300 series Ergoline sunbed. Price: £35.00

Base Tube End Cover for a 200/300 series Ergoline sunbed. Price: £35.00

Ergoline Tokens. These tokens are for use with any Ergoline token meter, (MCS3 or MCS 4). Both sides of the token are shown for identification purposes. Bag...

Ultrasun & Helionova Token. This token if for use with Ultrasun and Helionova token meters. Ultrasun and Helionova sunbeds use a special pulse type...

26/35 1st Generation MCS printed circuit board. (Part No. 11723)

Side Perspex for Zenith - Standard version. Size: 2064 x 210 x 2mm. New Part 

Tee piece - 300 mm.

1000 watt high pressure facial bulb for use in all sunbeds. This type is a single end type.

Rear PCB for LCS 3100 token meter - Main power

UWE Eprom Ref no 260240. Control eprom for use on UWE main PCB.

UWE Eprom Ref no 263770. Control eprom for use on UWE main PCB.

UWE Eprom Control Eprom for UWE main PCB

1000 watt high pressure facial bulb for use in all sunbeds. This type has 2 cable leads attached to it.

Canopy End gables LH or RH, (Please specify which)

ABB Contactor

ABB 26-30-10 contactor.

Allen Bradley M09 contactor. Small type used on Alisun

Square D contactor. Smaller type for use on Ergoline

Flexible duct hose - 250 mm - per 6 mt length. Colour: Grey

Bow tube set - LH or RH (Please specify which) for Price: £47.00

Front PCB for LCS 3100 token meter control board

Signal transmitter printed circuit board. (Part No. 11479)

Galvanised spiral wound pipe - 300 mm - per 3 metre length

Base under perspex for an Avantgarde sunbed. reconditioned part.

Ergoline MCS,  PC Board for 200/300 classic sunbeds, 2nd Generation. (Part no 12130)

Base End gables LH or RH, (Please specify which)

Ergoline 450 Eprom. For use on main PCB in 450 Classic range 04/2000 onwards. Part No. 11646C.

Ergoline 500/600 Eprom. For use on main PCB in 500/600 UTP range 1997 onwards. Part No. 11579B.

Ergoline 500/600 Eprom. For use on main PCB in 500/600 Classic range 1999 onwards. Part No. 11742D

Ergoline 500 - 700 Eprom. For use on main PCB in 500 - 700 Classic range 2001 onwards. Part No. 12126A.

Ergoline 550/600 Eprom. For use on main PCB in series 2, 550/600 Avantgarde range 2001 onwards. Part No. 11738F.

Ergoline Eprom. For use on main PCB in 500/600 Evolution & 700/800 Excellence range 2003 onwards. Part No. 12277K

Ergoline Eprom. For use on main PCB in 350 Advantage range 2003 onwards. Part No. 12593.

Ergoline Eprom. For use on main PCB in 400 Advantage range 2003 onwards. Part No. 12594

Ergoline CD drive Eprom Set. For use on main PCB and CD drive PCB in Avantgarde range 2001 onwards. Part No. 12220 & 12233.

Ergoline CD drive Eprom Set. For use on main PCB and CD drive PCB in Avantgarde range 2001 onwards. Part No. 12220 & 12233.

Flexible duct hose - 300 mm - per 6 mt length. Colour: Grey  

Allen Bradley C23/400 contactor. Larger type

Telemecanique LC1 contactor. Large type contactor

Flexible duct hose - silver - 250 mm.

Base gable LH or RH (Please specify which) for Ergoline

Square D contactor. Larger type for use on Ergoline

Canopy gable LH or RH (Please specify which) for Ergoline

Frame seal for base perspex to trough frame.  Sufficient to do complete surround for one sunbed. Size length 5.62 metres.

Flexible duct hose - 300 mm - per 6 mt length. Colour: Silver

ABB Contactor

Ergoline Language Chip Set.  Set of 3 eproms. For use in Evolution and Excellence series sunbeds. English language version. Serial Nos. 12413, 12428...

Ergoline Language Chip Set. For use in Evolution and Excellence series sunbeds. Set of 3 eproms. German language version. Serial Nos. 12364, 12365 and...

Ergoline Canopy Rope

KBL Canopy Rope

Skeleton type relay for use in Ergoline sunbeds. 12v

Skeleton type relay for use in Ergoline sunbeds. 240

Ergoline Roller Fan. For use in the haed fan of 200/300 Classic series sunbeds.

Ergoline Roller Fan. For use in the foot fan of 200/300 Classic series sunbeds.

Dr Kern Prestigue Base Front

ABB over run timer for use on Hapro sunbeds.

Square D CCN 363 contactor. Large contactor for use

Voice Guide PCB for Evolution & Excellence series sunbeds. (Part No.12342)

Perspex for Eclipse vertical tanner - stndard version.1830 x 412 x 3mm. - New

Coin Box PCB for Evolution & Excellence series sunbeds. (Part No.12239)

Base lower lip for a 500 Classic series sunbed. Colour:

Sontegra door or rear panel perspex for a Sunami vertical sunbed. New.

Sunquest Eclipse perspex vertical tanner - Long version. Size: 2000 x 412 x 3mm. - New Part

Facial fan control printed circuit board for 450/500/600 Classic/Avantgarde series sunbeds.

Perspex for Aurora vertical tanner - Standard version. Size: 1800 x 600 x 2mm. - New Part.

Main fan control printed circuit board for 450/500/600 Classic/Avantgarde series sunbeds. Green LED. (Part No. 11887)

Body fan control printed circuit board for 450/500/600 Classic/Avantgarde series sunbeds. Red LED. (Part No. 12013)

Perspex for Aurora vertical tanner - Long version.Size: 2010 x 600 x 2mm. - New Part

Blue cobalt facial glass for 200/300 series sunbeds

Facial tanner PCB for Evolution & Excellence series sunbeds. (Part No.12240)

Decorative Lighting PCB for Evolution & Excellence series sunbeds. (Part No.12258)

Canopy Perspex for Zenith sunbed - Standard version. Size: 1960 x 830 x 2mm. - New Part.

Fragrance/Aquafresh PCB for Evolution & Excellence series sunbeds. (Part No.12242)

Canopy lip for a 500 UTP series sunbed. Colour: Red.

Base lip for a 500 UTP series sunbed. Colour: Red Secondhand,

Canopy Perspex for a Zenith sunbed - Long version. Size: 2060 x 830 x 2mm. - New part.

MCS 3 Handset. Used for controlling Ergoline sunbeds.

Fan control PCB for Evolution & Excellence series sunbeds. (Part No.12219)

Ergoline Fan Control PCB for evolution and excellence beds(Part no 12219)

Dr Kearn Prestige Canopy Top

Ergoline Excellence Audio PC Board (Part no 12244)

VIT facial glass for 450/500/600/700 Classic series sunbeds.

Air Con/Heater PCB for Evolution & Excellence series sunbeds. (Part No.12241)

Canopy lip for a 500 UTP (series 2) sunbed. Colour:

Ergoline 600 Classic Series 1 Base Lip in blue

Canopy lip for a 600 UTP (series 2)sunbed.

Canopy lip for a 600 Classic series sunbed.

Complete control panel with PCB's for a Lotus Sunbed.  New

Ergoline MCS3 Token Meter. For controlling all Ergoline sunbeds. Reconditioned unit.

Ergoline MCS4 Token Meter. For controlling all Ergoline sunbeds. Reconditioned unit.

Ergoline 450 Classic side perspex (secondhand)

Ergoline Base Spider Fan. For use in 200/300 Classic series sunbeds

Ergoline 700 Classic side perspex (secondhand)

Hapro Lumina E class 40 canopy perspex.  Reconditioned part.

T-Max® Manager

Base perspex for a Sontegra 30/15 sunbed. New.(1910mm x 760mm)

Sontegra Main Cooling fan

Base perspex for a Sontegra 30/31 sunbed. New (2070mm x 760mm)

PCB for UWE Sunbed.  Part Number 265754.  New

UWE Control PC Board Part no uwe218883

UWE Roller afn. Used as the main cooling fan on most UWE sunbeds.

Ergoline Lounge - inner door perspex.  New.

Inline Tube Fan 355mm

MCS 4+ Handset. Used for controlling Ergoline sunbeds.

Slot PCB for Evolution & Excellence series sunbeds. (Part No.12215)

Base perspex for a UWE Black Energy sunbed. Size: 1850mm x 1060mm. Condition:   New.

I.D.E e2.05 Control Unit.

LT 3100 Coin Operated Timer Dual / single coin operation

LT 3100 Coin Operated Timer. Pulse type

VIT glass facial bowl for 450/500/600/700 Classic and Avantgarde series sunbeds.

Main Power PCB for Evolution & Excellence series sunbeds. (Part No.12214)

Ergoline 600 Classic Canopoy Perspex - wide section part no 86265

VIT facial glass for Evolution and Excellence series sunbeds.

Cockpit Display PCB for Evolution & Excellence series sunbeds. (Part No.12216)

Base Perspex for Standard Zenith.Size: 1964 x 876 x 5mm. - New Part

500/600 Control console printed circuit board.

Audio Amplifier PCB for Evolution & Excellence series sunbeds. (Part No.12274)

Base perspex for a KBL 5000 series sunbed. New.

MCS 3  Ergoline Handset for use with ergoline

Bus System PCB for Evolution & Excellence series sunbeds. (Part No.12468)

Ergoline Roller Fan. For use in all 450/500/600/700 UTP & Classic series sunbeds. This is the main circulation cooling fan.

Outer Door Glass For Lounge

Base Perspex for Zenith - Long version. Size: 2064 x 876 x 5mm. - New Part

MCS 3+ Ergoline Handset for use with ergoline sunbeds

Base perspex for a KBL 7000 series sunbed. New.

40/44/400 GB series main printed circuit board. (Part No.11422)

Base perspex for a UWE V12i sunbed. Size: 2110mm x 1060mm.  New.

8mm Base  perspex for 450 Classic - pattern - flat, new.

8mm Flat base perspex for an 500 Classic base - pattern - new

8mm Flat base perspex for an Ergoline 600 Classic - pattern type - New part.

Base perspex for a UWE sunbed. Size: Length 2030mm, Width 1020mm. New

Ergoline Lounge main panel perspex. LH or RH,  New

450/500/600 UTP series printed circuit board - recon (Part No. 11558)

450 / 500 / 600 Classic & Avantgarde series printed circuit board - recon. (Part No. 11619)

Base perspex for an Avantgarde sunbed c/w frame.  New